Download Print this page

Advertisement

P30 Console
Operator's Guide
Equati on 1: E nglis h

Advertisement

loading
Need help?

Need help?

Do you have a question about the P30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Precor P30

  • Page 1 P30 Console Operator's Guide Equati on 1: E nglis h...
  • Page 3: Table Of Contents

    Table of Contents Get Started Setting Up the Console ........................... 4 Setting Club Parameter Values ........................5 Informational Settings ............................ 9 User ID Entry with CSAFE Equipment ...................... 11...
  • Page 4: Get Started

    Use the System mode to configure settings in ways that benefit your users and your facility. Note The information provided in this section is intended for system administrators and Precor service technicians. DO NOT share it with exercisers or non-administrative staff.
  • Page 5: Setting Club Parameter Values

    Setting Club Parameter Values Use this information to customize the equipment for your setting. Safety Code (Treadmill only) Value Range: Enabled or Disabled Default: Disabled When the equipment is shipped from the factory, the safety code feature is disabled. An enabled safety code requires users to enter the code 1 2 3 4 to use the equipment.
  • Page 6 Set Cool Down Time (All Equipment) Value Range: 0 to 5 minutes Default: 5 minutes Select the maximum amount of time the equipment remains in the cool down mode, which is the period of time following the completion of a program when the user exercises at a reduced work rate. Set Metric Default (Treadmill only) Value Range: Off or On Default value: Off...
  • Page 7 Value Range: On and Off Default Value: On Precor strongly recommends that you leave this setting ON. This ensures that the treadmill will stop if it does not detect a user. Setting Custom Workouts 1 and 2 Value Range: ON or OFF Default Value: OFF You can create and save two custom workouts on your equipment.
  • Page 8 Mait (Maintenance) Configuration (EFX and Treadmill only) Value Range: On or Off Default: On Turns on the service light counter and enables the Active Status Light™ (ASL) to alert your staff to the operating status of the equipment. The counter begins at 1000 miles for treadmills and 250 hours for the EFX, and counts down with use. When it reaches zero, the ASL turns blue and blinks, alerting you that equipment maintenance is required.
  • Page 9: Informational Settings

    Informational Settings Information Display settings provide access to an error log, software and equipment serial numbers, and usage information. To view the Informational settings: Press Pause. Enter the password: 6 5. Press Enter. The settings appear. Scroll through the informational settings. Informational Displays values Product Value...
  • Page 10: Error Log

    Equipment 00-09, 11-16, 50 Turn the equipment off and on. Repeat twice. If the message still AMT, elliptical, treadmill, appears, contact a Precor certified service technician. RBK, UBK, and CLM 10, 20-23, 26-28, 32, LS, Contact a Precor-certified service technician.
  • Page 11: User Id Entry With Csafe Equipment

    User ID Entry with CSAFE Equipment This equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAFE master device, the user is prompted to press ENTER and begin an identification process. The user ID is displayed as five zeros and indicates the starting point. The following table describes key functions while in CSAFE mode.
  • Page 12 P30 Console Operator's Guide for WEB | P/N 304577-101 rev B, ENU ©2017 Precor Incorporated | February 2017...