Using The Unifi Controller Software; Interface Tabs; Common Interface Options; Recent Events - Ubiquiti UniFi UAP User Manual

UniFi AP/AP-LR User Guide
Chapter 3: Using the UniFi
Controller Software
The UniFi Controller software that comes with your UniFi
Enterprise WiFi System has a browser-based interface for
easy configuration and management.
To access the interface, perform the following steps:
1. Launch the UniFi Controller application if hasn't already
been started.
• Mac users: Go > Applications > UniFi
• Windows users: Start > All Programs > Ubiquiti
UniFi.
2. The UniFi login screen will appear. Enter the admin
name and password in the appropriate fields and click
Login.

Interface Tabs

The UniFi software consists of six primary tabs. This User
Guide covers each tab with a chapter. For details, on a
specific tab, refer to the appropriate chapter.
• "Map Tab" on page 13
• "Statistics Tab" on page 20
• "Access Points Tab" on page 22
• "Users Tab" on page 23
• "Guests Tab" on page 24
• "Offline Clients Tab" on page 25

Common Interface Options

The common interface options are accessible from all tabs
in the UniFi interface.
Ubiquiti Networks, Inc.
Chapter 3: Using the UniFi Controller Software
Access Points
•
Drop-down clickable list of all of the Access
connected
Points that are online.
•
Displays a list of Access Points that were
disconnected
previously online but are no longer accessible.
•
Drop-down clickable list of all of the Access
pending
Points that are not yet managed but are available for
management.
Stations
•
Displays the total number of users connected to
users
the primary network.
•
Displays the total number of users connected to
guests
the guest network.

Recent Events

Displays a list of recent events including the date and time
the event occurred and the details of the event. The User
and Access Point names are clickable links.
Move the slider right and left to navigate
Event Slider
between pages of events.
Allows you to enter text you want to search for.
Search
Simply begin typing, there is no need to press Enter.
Clicking on an Event Device Link
The event messages have clickable links
underlined in gray text] for AP (See "Access Point Details"
on page 26), User and Guest (See "User/Guest Details"
on page 34). Details vary based on the selection.
[in brackets
7