Ubiquiti UniFi UAP User Manual page 36

UniFi AP/AP-LR User Guide
Advanced Adoption
The IP address and SSH port of the Access Point are
IP
populated here.
Enter the SSH Username for management
Username
access.
Enter the SSH Password for management
Password
access.
The URL will be populated but you may need
Inform URL
to verify the accuracy as the system may have multiple
interfaces.
Ubiquiti Networks, Inc.
Forget this AP
Click to remove the Access Point from
Forget
management by the UniFi Controller software and to
restore it to factory default settings.
Use caution when clicking Forget. This
Note:
will restore the Access Point to factory settings
when in a Connected state. Do not use the
Forget option when the Access Point is in an
Isolated state. If you do, the only way to make
the Access Point accessible from the UniFi
Controller is to take it down and connect by
wire.
Chapter 10: Access Point Details
33