Front; Back - Ubiquiti UniFi UAP User Manual

UniFi AP/AP-LR User Guide

Front

Indicates the status of the device. See
LED
the table below for details.
LED Color Status
Flashing Amber Initializing
Steady Amber Factory default, waiting to be integrated
Device is busy, do not touch or unplug it,
Alternating
this usually indicates a process such as a
Amber/Green
firmware upgrade is taking place
This is used to locate an AP.
When you click on Locate in the UniFi
Quickly Flashing
Controller software, the AP will blink. It will
Green
also display the location of the AP on the
map.
Indicates the device has been successfully
Steady Green integrated into a network and is working
properly.
Steady Green Indicates the device is in an isolated state
with occassional (all WLANS are brought down until an
flashing uplink is found).
Ubiquiti Networks, Inc.

Back

The reset button serves two functions:
Reset Button
•
It will restart the device when you press
Restart
and release it quickly.
•
Restore Factory Defaults
hold it for more then 5 seconds, it will restore the
device to the factory default settings.
Connects to the 24v PoE
Ethernet Port
Adapter to provide power to the unit.
Chapter 1: Product Overview
When you press and
2