Ubiquiti UniFi UAP User Manual page 32

UniFi AP/AP-LR User Guide
•
Only supports wireless-n devices.
11n only
•
Only supports wireless-g devices.
11g only
WLANs
Allows the deployment of different WLANs on different
Acess Points.
Displays the name of the SSID (network name) of
Name
the wireless LAN (WLAN) that is available for the user to
connect to.
Displays SSID override information applied
Overrides
to the wireless LAN (WLAN) using the Actions > Override
option.
Click Override to enable a VLAN, set the VLAN ID
Actions
and enter the SSID override name to apply to the wireless
LAN (WLAN).
Ubiquiti Networks, Inc.
Select to enable or clear to disable override
Enabled
settings on the WLAN.
Select to enable VLAN or clear to disable VLAN.
VLAN
The VLAN ID is a unique value assigned to
VLAN ID
each VLAN at a single device; every VLAN ID represents
a different Virtual Network. A value between 2 and 4095
may be entered. For example, in a larger deployment
where there are multiple buildings, it's possible that a
different VLAN ID is used in each building while still on the
same corporate network.
Enter the SSID override name to apply to the
SSID
wireless LAN (WLAN).
If the WPA-Personal security option has been applied
PSK
to the WLAN under Settings > Wireless Networks, the Pre-
Shared Key (PSK) for the SSID specified will automatically
appear in this field.
Be sure to click Apply to save any changes that you have
made. Click Restore to remove any overrides that were
applied to the selected WLAN. Click Cancel to prevent
application of any changes you have made.
Chapter 10: Access Point Details
29