Ubiquiti UniFi UAP User Manual page 9

UniFi AP/AP-LR User Guide
Configuring the UniFi Controller Software
1. The UniFi Controller software startup will begin. When
the option becomes available, click Launch a Browser
to Manage Wireless Network.
2. Select your language and country. Alternatively you
can restore from a previous backup by clicking Browse.
Click Next.
3. Select the devices that you want to configure and click
Next.
4. The UniFi Installation Wizard will create a secure
primary wireless network for your devices. Perform the
following steps:
a. Enter a unique wireless network name (SSID) in the
Secure SSID field.
b. Enter a unique passphrase to be used for your
primary network in the Security Key field.
Ubiquiti Networks, Inc.
c. To enable guest access, select Enable Guest Access
and enter a guest network name in the Guest SSID
field.
d. Click Next.
5. Enter an admin name in the Admin Name field and
password in the Password field to use when accessing
the management interface. Confirm your password in
the Confirm field. Click Next.
6. On the Finish tab, review your settings. Click Back to
make changes or Finish to save your settings. Once
finished you will be redirected to the management
interface via your web browser.
Congratulations, your wireless network is now configured.
A login screen will appear for the UniFi Controller
management interface. Enter the admin name and
password that you created and click Login.
Proceed to the next chapter for information on using the
UniFi Controller software.
Chapter 2: Installation
6