Table of Contents
Advertisement
3.4
Configuring the MP-1xx Basic Control Protocol
Parameters
To configure the MP-1xx basic control protocol parameters use the Embedded Web Server's
'Quick Setup' screen.
•
For MGCP refer to Section
•
For H.323, refer to Section
•
For SIP, refer to Section
When you have completed the above relevant section you are then ready to start using the MP-
1xx. For information on how to fully configure the VoIP gateway, refer to the MP-1xx User's
Manuals.
Tip:
Note:
MP-1xx
3.4.1
on page
3.4.2
on page
3.4.3
on page
Once the gateway is configured correctly, back up your settings by making a
copy of the VoIP gateway configuration (ini file) and store it in a directory on
your computer. This saved file can be used to restore configuration settings at
a future time. For information on backing up and restoring the gateway's
configuration refer to Section
The following configuring Sections from here up to and including Section
3.4.3
on page
26
apply individually to MGCP, H.323, or SIP.
MGCP Configuring continues with Section
H.323 Configuring continues with Section
SIP Configuring continues with Section
22.
24.
26.
5
on page 30.
3.4.1
3.4.2
3.4.3
on page 26.
22
on page 22.
on page 24.
Document #: LTRT-61405
MP-1xx
Advertisement
Table of Contents
