Pager Communication; 2-Way Voice Operation - GE Simon Installation Instructions Manual

Note
Panel voice announce-
ments are silenced during
AVM sessions. If the opera-
tor does not terminate the
session correctly, panel
announcements may not
occur for up to 90 seconds
after the operator hangs up.
Simon Security System
4. When you finish testing the system, call the central station to verify that the
alarms were received.
User Codes for Opening and Closing Reports
Arm or Disarm from:
Panel or Remote Handheld Touchpad
Keychain Touchpad
Master Code
Access Codes 1-5
Panic Code

Pager Communication

Use the following table to determine what the numeric message is reporting.
Reports
Phone Test
AC Power Restoral
AC Power Failure
Latchkey
No Activity
Panic Code
Emergency
Intrusion
Fire
Openings
Closings
Fail to Open
Fail to Close

2-Way Voice Operation

To initiate an audio session, the central station operator must perform the following
steps:
1. After the panel has completed reporting the alarm, pick up the CS phone and press
the ‚ button to start the audio session.
2. Press 1 or 0 to speak, 2 for VOX operation, and 3 or 6 to listen.
3. Press 99 to terminate the session.
0
1-24 (sensor number)
30
31-35
36
Pager Reporting Message
Numeric Message
-101 -101
-102 -102
-103 -103
-104 -104
-105 -105
-106 -106
-107 -107
-108 -108
-109 -109
-110 -110
-111 -111
-112 -112
-113 -113
Reports as User:
46