Rtp Parameters - ATCOM AT800DP User Manual

AT800 Series User
AT800 Series AT800 AT800 Series Series User User User Manual
SIP SIP SIP T4 T4 T4 T4---RFC 3261 T4 value, which is the maximum duration a message remains in the
3. SIP
network. Ranges from 0 to 64 seconds. Defaults to 5 seconds
Reg Reg Retry Retry
4. Reg Retry Reg Retry Intvl
the previous registration. Defaults to 8 seconds.
Sub Sub Retry Retry
5. Sub Retry Sub Retry Intvl
seconds.
RTP Parameters
RTP RTP

RTP Parameters

Parameters Parameters
1. RTP Port RTP RTP RTP Port Port Port---Minimum port number for RTP transmission and reception. <RTP Port Min>
and <RTP Port Max> should define a range that contains at least 2 even number ports .
Defaults to 16384
RTP RTP Port Port Max Max
2. RTP RTP Port Port Max Max---Maximum port number for RTP transmission and reception. <RTP port
Min> and <RTP Port Max> should define a range that contains at least 2 even number
ports. Defaults to 16482.
RTP Packet
3. RTP RTP RTP Packet Packet Size Packet
Warning Warning: : : : Lin16-16 codec only supports RTP packet size = 10 ms because of the voice chip
Warning Warning
limitation. G.723 only allows 30ms/60ms RTP packet size.
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
Intvl Intvl
Intvl---interval to wait before the phone retries registration after failing during
Intvl Intvl
Intvl---The retry interval when the last SUBSCRIBE request fails. Defaults to 10
Size (ms)
Size (ms) Size (ms)---Packet size in milliseconds, which can be 10, 20, 30, 40, 60 (ms)
www.atcom.cn