ATCOM AT800DP User Manual page 45

AT800 Series User
AT800 AT800 Series AT800 Series Series User User User Manual
2) Make sure the cable and connected switch port is OK
3) Make sure the DHCP server is on, and there are available IP addresses in the lease table
4) Try to set LAN port to static IP mode
Conversation Conversation with with
Conversation Conversation with with one
1) Make a direct IP call to make sure there is no problem with the headset receiver and
microphone.
2) Enable STUN in SIP settings webpage
3) Set STUN server, as stun.xten.com
4) Click submit to restart the phone.
5) Make a call again.
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
one one way way speech speech
one way way speech speech
www.atcom.cn