Place Or Answer A Call; Basic Phone Functions - ATCOM AT800DP User Manual

AT800 Series User
AT800 AT800 AT800 Series Series Series User User User Manual
3. Configuring the SIP parameters:
� Click admin on the right corner of the webpage to login administrator interface
�
Click Account tab
� Under SIP parameters, make the necessary configuration changes to the fields shown in the
following table and click submit:
Enable: yes/no
User ID:
Password:
SIP Server:
SIP Port:
Transport Type:
After that, click submit button to save the configuration. The phone will be restart automatically to make
the changes effect.
For AT800/AT800P, it's not able to view the current IP by man-machine interface because there's no LCD
screen. User should login via PC port. Please refer to
through PC port IP address.
W W W W arning: arning:
arning: arning: If the parameter remember
automatically, user don't have to make a manual login after a restart; if it is set to no
User ID ID ID ID and password User password
enter the User User password manually every time restating the phone. password
Basic Phone
Basic Basic Phone Basic Phone Phone Functions
Place Place Place or or or or Answer Answer Answer Answer a a a a call
Place
� Press headset button to place or answer a call
� If the auto answer parameter is set to yes, the incoming call will be answered automatically.
� If dial assistance is enabled, when placing calls, user will see a list of closely-matched phone
numbers on the screen when dialing. To choose one of them: using the navigation button to scroll
down and highlight a phone number on the LCD screen, press dial to complete the call.
� Enter the personal directory, use navigation button to scroll down to highlight an entry then press
Dial to place a call
�
Enter the Redial list menu, use navigation button to scroll down to highlight an history number, and
press Dial to complete the call.
�
Use the programmable key to place a call to the pre-configured number.
For AT800/AT800P, user can place a call as followings:
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
Enable/disable the SIP registration
The username, provided by ISP.
The password, provided by ISP.
The registrar and proxy server (we don't distinguish
between the registrar server and the proxy server right
now).
The default SIP port is: 5060, user can modify it to fit the SIP
server's port.
Optional transport type, can be set as UDP/TCP/TLS
remember account
remember account remember account is set to yes account
Functions
Functions Functions
call call
call
Web Interface part, and log in the web interface
yes
yes yes, the account information will be saved
www.atcom.cn
no no, user will have to no