ATCOM AT800DP User Manual page 36

AT800 Series User
AT800 Series AT800 AT800 Series Series User User User Manual
Date Date and Date Date and and Time and Time Time Time
NTP
� NTP NTP NTP
1. NTP server---Network Time Protocol. Set NTP Server, and both domain and IP address are
allowed.
2. Time zone---Choose proper time zone of the local time.
� � � � Manual
Manual Manual Manual
1. Set Local Date (YYYY/MM/DD)---Set a manual date by inputting in YYYY/MM/DD formate.
E.G. 2012/10/1. Or click the icon
2. Set Local Time(hh:mm:ss)---Set a manual time by inputting in hh:mm:ss formate. E.G.
12:00:00. Or click up/down button to increase/decrease the value.
Note: In manual mode, the date and time will be reset after a restart.
� � � � Daylight Daylight Saving Saving Time Time
Daylight Daylight Saving Saving Time Time
1. Daylight Saving Time---Enable or disable the daylight saving time.
2. Daylight Saving Time Rule--- Set daylight saving time rule in format of:
start=<start-time>;end=<end-time>;save=<save-time>
<start-time> and <end-time> are of the form: MM/DD/WW/hh:mm:ss. <start-time> and
<end-time> specify the start and end time-date of daylight saving time.
<save-time> is the amount of hour/min/sec to add to the current time during daylight saving
period. The <save-time> value can be preceded by a negative (-) sign if subtraction is desired
instead of addition.
E.G. start=4/1/7/8:00:00;end=10/1/7/9:00:00;save=-1
st
Start time is 1
st
End time is 1 October, Sunday, 9:00:00 am
The display time will be one hour early than the standard time.
After finishing, click submit to make the changes effective.
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
April, Sunday, 8:00:00 am
to choose the date on calendar.
www.atcom.cn