Volume; Mute; Hold; Resume A Call - ATCOM AT800DP User Manual

AT800 Series User
AT800 AT800 AT800 Series Series Series User User User Manual
1. Press headset button, enter number and # (send key) to dial
2. Press headset button, enter a speed dial number, the pre-configured number will be dialed
3. To hang up the active call, press headset button again.
Note: If setting * as the send key, use * instead of #, If send key is set to none, wait for about 10 seconds,
the number will be dialed automatically.

Volume

Volume and and Mut Mut Mute e e e
Volume Volume and and Mut
Volume
Volume Volume Volume
To adjust the output volume in a conversation, press right navigation button to increase the volume, or
press left navigation button to decrease the volume.
Pressing the right/left navigation button on idle state can adjust the volume of the phone's ringer.

Mute

Mute Mute Mute
To mute the call in a conversation, press the Mute button, the button lights in red. Press the Mute button
again to unmute.

Hold

Hold
Hold Hold
� To put a call on hold in a conversation, press the hold softkey to hold the call
�
When setting a programmable key to hold function, press the specified key will hold the call.
For AT800/AT800P, using programmable key to put a call on hold, refer to
details.
Resume Resume Resume a a a a call call call
Resume call
� To resume a held call, press Resume softkey.
� When setting a programmable key to hold function, pressing the specified key again in hold mode
can resume the call.
� For AT800/AT800P, using programmable hold key can resume the call, refer to
details.
ATCOM TECHNOLOGY CO., LIMITED
Manual
Manual Manual
Programmable key
Programmable key
www.atcom.cn
for more
for