Connecting To The Ethernet; Figure 3-3 Console Cable Assembly - H3C VG 31-08 Installation Manual

Installation Manual
H3C VG 31-08 Voice Gateway

Figure 3-3 Console cable assembly

III. Connecting the Console cable
When configuring the VG 31-08 through a console terminal,
follow these steps to connect the console cable:
Step 1: Select a console terminal.
The console terminal can be either a standard ASCII terminal
with an RS232 serial port or more commonly, a PC.
Step 2: Connect the cable.
Power down the console terminal, and then connect the RS232
serial port on the console terminal to the console port on the VG 31-08
through the console cable.

3.5 Connecting to the Ethernet

I. Ethernet cable
For a 100BASE-TX Ethernet interface, you can use a category-5
twisted pair cable, as shown in the following figure:
Chapter 3 Installing the VG 31-08
3-5