Downloading The Application Program - H3C VG 31-08 Installation Manual

Installation Manual
H3C VG 31-08 Voice Gateway
External Clock Rate 50 Mhz
Serial channels will use a baud rate of 9600
TFTP SERVER PARAMETERS:
IP address of the TFTP host is 10.110.10.13
The file to download and start is VG20X.BIN
After board is reset, start-up code will wait 5 seconds
-------------------------------------------------------
(M)odify any of this or (C)ontinue? [M]
Press <C> to confirm the configurations.

5.5.4 Downloading the Application Program

Step 1: Boot the system and enter the boot menu.
Step 2: Enter 2 in the boot menu to download the application
program using TFTP. The following message appears:
Download application program, are you sure?[Y/N]Y
If the PC running the TFTP Server is ready, press <Y> to
download the program.
Starting the TFTP download...
.......................................................
..........................................
After the downloading is completed, the system displays:
TFTP download completed...
read len = [06031367]
Writing into Flash Succeeds.
Please wait, it may take a long time...
Chapter 5 Software Maintenance
5-16