Running Tftp Server; Configuring The Vg 31-08 - H3C VG 31-08 Installation Manual

Installation Manual
H3C VG 31-08 Voice Gateway
Step 2: Connect the console port of the VG 31-08 to an external
console terminal (it can be an external PC connected to the Ethernet
interface), and configure HyperTerminal with reference to section
4.1.1 II. "Setting terminal parameters".
Step 3: Install the TFTP Server on the PC.
Note:
The VG 31-08 does not provide the TFTP Server program, and you
should purchase and install it by yourself.
Step 4: Copy the new application file to a directory, "C:\H3C" for
example.
Step 5: Configure the IP address for the fast Ethernet (FE)
interface on the PC, 10.110.10.13 for example.

5.5.2 Running TFTP Server

Step 1: Run the TFTP Server on the PC.
Step 2: Specify a directory for the new application program.

5.5.3 Configuring the VG 31-08

Step 1: Boot the VG 31-08 and press <N> upon appearance of
the message "Voice Gateway starts booting ... ". The system displays
the following message:
(M)odify any of Voice Gateway configuration or (C)ontinue?
[M]
Chapter 5 Software Maintenance
5-13