Using Watchbp Analyzer; Installing The Software Program; Connecting The Device To A Computer; Start The Software Program - Microlife WatchBP Office Instruction Manual

Using WatchBP Analyzer

Installing the Software Program

The latest WatchBP Analyzer Software is available from the Microlife website.
https://www.microlife.com/support/softwareprofessional-products
Double click the download installer and simply follow the instructions provided in the
installation window on the computer screen.

Connecting the Device to a Computer

Connect the device to the PC using the USB
cable provided with the device.

Start the Software Program

Start the software program. The date and
time on the device automatically synchronizes
with the date and time on the computer when
successfully connected with WatchBP Analyzer
PC software.
If the device and WacthBP Analyzer software is
connected successfully:
• <USb> is displayed on the LCD screen of the device.
• The device ID, model, version of the Device and batteries condition etc. are displayed on the
WatchBP Analyzer software.
Transferring measurement data
Connect the device to the PC. Start the WatchBP Analyzer software program.
Click <Download> button of the WatchBP Analyzer to transfer the measurement data on the
device to a computer.
Deleting measurements
The measurement data on the device will be automatically deleted after clicking <Program
Device> in the WatchBP Analyzer software to program a measurement schedule for the next
patient.
*
Press and hold button of the device for 7 seconds displays CL, presses
to clear the memory

See instruction manual of WatchBP Analyzer for details.
14
DC 7.5V 2.0A
DC 7.5V 2.0A
button again