Viewing, Transferring And Deleting Measurement Data; Viewing Measurement Data - Microlife WatchBP O3 Instruction Manual

Viewing, transferring and deleting measurement data

Viewing measurement data

1) Use the mode switch to first select the type of
measurements to be viewed.
AMBULATORY
2) Then press the M button
AMBULATORY
26
CASUAL
CASUAL
In «AMBULATORY» mode
1) When the M button is pressed, it briefly displays the total
number of measurements stored, e.g. N=40, followed
immediately by the average of all measurement data
stored in the memory.
F
«A» is displayed when the
number shown is the average of
all data.
F
«- -» will display when the number
of measurements is less than 12.