Using Watchbp Analyzer; Installing The Software Program; Connecting The Device To A Computer; Start The Software Program - Microlife WatchBP Office Vascular Instruction Manual

Using WatchBP Analyzer

The memory data can be transferred to your PC (personal computer) running the
WatchBP Analyzer Software by connecting the monitor via USB cable or Bluetooth.
System Requirements for Software:
1GHz CPU. 512MB Memory, 4.5GB free hard disk space, Microsoft Windows 7 SP1 /
8 / 10

Installing the Software Program

The latest WatchBP Analyzer Software is available from the Microlife website.
https://www.microlife.com/support/software-professional-products
Double click the download installer and simply follow the instructions provided in the
installation window on the computer screen.

Connecting the Device to a Computer

It is important to only use the USB cable
provided.

Start the Software Program

Start the software program. The date
and time on the device automatically
synchronize with the date and time on the
computer when successfully connected
with WatchBP Analyzer PC software.
If the device and WatchBP Analyzer
software is connected successfully:
• The <USb> is displayed on the LCD screen of the device.
• The device ID, model, version of the Device and batteries
condition etc. are displayed on the WatchBP Analyzer
software.
Transferring measurement data
Connect the device to the PC. Start the WatchBP Analyzer software program.
Click <Download> button of the WatchBP Analyzer to transfer the measurement data
on the device to a computer.
Deleting measurements
The measurement data on the device will be automatically deleted after clicking
<Program Device> in the WatchBP Analyzer software to program a measurement
schedule for the next patient.
Press and hold button of the device for 7 seconds displays CL, presses
*

See instruction manual of WatchBP Analyzer for details.
14
DC 7.5V 1.5A
button again to clear the memory