Table of Contents
Advertisement
Using WatchBP Analyzer
The memory data can be transferred to your PC (personal computer) running the
WatchBP Analyzer by connecting the monitor via USB cable or Bluetooth.
System Requirements for Software
1GHz CPU. 512MB Memory, 4.5GB free hard disk space, Microsoft Windows 7 SP1 /
8 / 10
Installing the Software Program
The latest WatchBP Analyzer is available from the Microlife website.
https://www.microlife.com/support/software-professional-products
Double click the download installer and simply follow the instructions provided in the
installation window on the computer screen.
Connecting the Device to a Computer
It is important to only use the USB cable
provided.
Start the Software Program
Start the software program. The date
and time on the device automatically
synchronize with the date and time on the
computer when successfully connected to
the WatchBP Analyzer PC software.
If the device and WatchBP Analyzer software is
connected successfully, the device ID, model,
version of the device, and battery condition
are all displayed on the WatchBP Analyzer
software.
Transferring measurement data
Connect the device to the PC. Start the WatchBP Analyzer software program.
Click <Download> button of the WatchBP Analyzer to transfer the measurement data
from the device to the computer.
Starting measurement(s) by the WatchBP Analyzer
Create a new patient if needed or select a patient in the WatchBP Analyzer. Click
<Measure> and select the settings in the pop up screen for the measurements. Click
<Measure> in the pop up screen to start the measurement(s).
The measurement data on the device will be automatically deleted after clicking <Measure> in the WatchBP Analyzer
*
software to start the measurement.
Press and hold
button of the device for 7 seconds displays CL, presses
*
See instruction manual of WatchBP Analyzer for details.
WatchBP Office
DC 7.5V 1.5A
button again to clear the memory
15
EN
Advertisement
Table of Contents
