Viewing, Deleting And Transferring Measurements Viewing Measurements - Microlife WatchBP Home A Instruction Manual

Viewing, deleting and transferring measurements
Viewing measurements
1) Use the Mode switch to first select the type of
measurements you wish to view.
DIAG.
2) Then press the M Button.
DIAG.
20
In «DIAG.» Mode
1) When the M Button is pressed, it briefly displays the
total number of measurements stored, e.g. N=20 and
then switches to the average of all readings.
USUAL
USUAL
*
«A» is displayed when
the number shown is
the average of all data.
«- -» will display when the
*
number of measurements
is less than 12.