Viewing, Deleting And Transferring Measurements Viewing Measurements - Microlife WatchBP Home Instruction Manual

Viewing, deleting and transferring measurements
Viewing measurements
1) Use the Mode switch to first select the type of
measurements you wish to view.
DIAG.
2) Then press the M Button.
DIAG.
15
In «DIAG.» Mode
1) When the M Button is pressed, it briefly displays the
total number of measurements stored, e.g. N=20.
USUAL
«A» is displayed when
*
USUAL
the number shown is
the average of all data.
«- -» will display when the
*
number of measurements
is less than 12.