ADC SUPER SIX S-100 Technical Manual page 20

COMMAND
B
D ssss qqqq
F ssss qqqq bb
G AAAA
I pp
L aaaa
M ssss qqqq dddd
o
pp dd
ESC
FUNCTION
Loads the disk-boot loader
Dumps memory in hex starting at user-specified address
ssss and ending at user-specified address qqqq
Fills memory from user-specified address ssss to
user-specified address qqqq with bb
Goes to address AAAA
Input to user-specified port pp
Loads memory starting at user-specified address aaaa
Moves the contents of user-specified starting address
ssss through user-specified ending address qqqq tp the
user-specifiea starting address of dddd
Output user-specified data dd to port pp
Terminates any command
Table 2-2. Monitor Commands For the SUPER SIX
The cold-start loader will select and home drive O. 1 rack 0 sector 1 will be read into
memory at location
o.
Single density is assumed for track O.
if
an error occures an error
code will be printed. The error code must be translated using the table in appendex G.
-Sl-