Table of Contents
Advertisement
1.3
.
This document is organized
inh' ) St',:t
i,'"~ ~lIld
14 J.ppendices.
Section I serves as an introduction to the entire document, stating the purpose of the
document and providing an introduction to the SlJPER SIX single board computer. This
section also provides a list of acronyms used in the document and provides a statement on
the responsibilities of document maintenance.
Section II provides a description of the operations of aU components associated with the
SUPER SIX single board computer.
Section III lists aD SUPER SIX input/output ports and defines the assignments and
functions of each port.
Section IV lists and defines all SUPER SIX jumper connections•. This section includes the
jumper assignments for factory (OEM) installed jumpers.
Section V describes the external connector pins for SUPER SIX connectors J I through J5.
The appendices provide supplemental material to the body of the text and' are referenced
in the text at the associated points.
1.4
LIST OF ACRONYMS
. \
Table 1-1 provides a listing and description of the acronyms used within this text.
ACRONYM
DESCRIPTIOt\l
CPU
Central Processor Unit
CTC
Controllertrimer Circui t
DART
Dual Asynchronous Receiver/Transmitter
DMA
Direct Memory Access
EPROM
ElectricaHy Erasable Programmable Read-Only Memory
FOe
Floppy Disk ControHer
IEEE
Institute of Electrical and Electronic Engineers
MP/M
Multiuser Program For Microcomputers
OEM
Original Equipment Manufacturer
PIO
ParaDel Input/Output
PROM
Programmable Read-Only Memory
Table 1-1. List of Acronyms
-2-
Advertisement
Table of Contents
