Fader Layers - SoundCraft Si Performer 1 User Manual

ASSIGNABLE CONTROLS > FADER LAYERS
The are four main Fader Layers on the Expression console, selected by the FADERS button
(A, B, C, and D) group to the right of the Control Channels. The additional buttons in this group
assign Graphic EQ bands across the faders for convenient control.
Each layer is made up of a number of Control Channel assignments. The Performer 1 has 14 Control Channels, the
Performer 2 has 22, and the Performer 3 has 30 - plus the Left/Right and Mono/Centre main mix Control Channels.
By default, Layers A and B are assigned to input channels, with the Stereo input channels on the right hand end of layer
B; Layer C is assigned to Mix Master channels and DMX Masters; and the first four Control Channels of Layer D are
assigned to the Matrix Master channels.
These assignments are user configurable in the FADER SETUP Touch Screen menu (see the Control Channel
Assignment section 3.2.1).
To select the four DMX layers, press and hold the ALT button and select one of the FADERS buttons (A, B, C, or D).
The selected layer button will turn oraange to indicate a DMX layer is active. Press that button again to return to normal
DSP layers.
User Manual
3.1: ASSIGNABLE CONTROLS > FADER LAYERS

3.1: FADER LAYERS