Belt/Deck/Roller Lubrication; How To Check The Running Mat For Proper Lubrication - LifeSpan COMMANDER User Manual

Table of Contents

Advertisement

T
AKE CARE TO PROTECT CARPETS AND FLOOR
m
achine that contains moving parts which have been greased / lubricated and could leak.

4.3 Belt/Deck/Roller Lubrication:

The mat/deck friction m
that is why we recommend you constantly lubricate this friction point to prolong the u
life of your treadmill.
Lubrication is provided with this unit. Y
approximately the first 50 hours of operation. We recom
according to the following timetable:
Light use (less that 3 hours per week) every 6 months
M
edium use (3-5 hours a week) every 3 months
Heavy use (more than 5 hours per wee
See below procedures for lubricating:
1.
Use a soft, dry cloth to wipe the area between the
2. Spread lubricant onto the inside surface of belt and deck evenly (make sure the
machine is turned off and power is disconnected).
3. Periodically lubricate the front and rear rolle
If
the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200
hours before additional re-lubing is necessary.
4.4
How to check the running mat for prope
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the back surface of the running mat.
If
the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
ay play a major role in the function and life of your treadmill and
ou should apply the enclosed lubrication after
k) every 6-8 weeks.
LIFESPAN COMMANDER
in case of leakages. This product is a
mend lubrication of the deck
belt and deck.
rs to keep them at there peak performance.
r lubrication:
seful
Page 17

Advertisement

Table of Contents
loading

Table of Contents