Table of Contents
Advertisement
System Connection
The system is connected via the RS232C (V.24) interface with a voltage
supply of +12V DC.
The following parameters are set as standard:
Transmission rate
Parity
Parity
Parameters other than these standard values can also be selected. Wire
jumpers must be soldered onto the display circuitry in order to do so.
Wire jumper
JP1
JP2
JP1
JP2
JP1
JP2
JP1
JP2
JP3
JP4
JP5
The position of the wire jumpers on the display circuitry is illustrated in the
following diagram. The front plate can be removed by pressing both of the
9.600 Bit/s
on
odd
IN/OUT
Parameter
OUT
9600 Bit/s
OUT
IN
4800 Bit/s
OUT
OUT
2400 Bit/s
IN
IN
1200 Bit/s
IN
OUT
Parity on
IN
Parity off
OUT
Parity odd
IN
Parity even
IN
Self-test
OUT
Normal operation
SYSTEM CONNECTION
17
Hide quick links:
Advertisement
Table of Contents
