Temporarily Activating Anonymous Calling For The Next Call; Temporarily Deactivating Anonymous Calling For The Next Call - Siemens OpenStage 40 Operating Manual

HiPath 8000 functions
Step by Step
114
Temporarily activating anonymous calling for
the next call
If your administrator activated caller ID transmission for
your phone, you can deactivate this setting for the next
call as follows:
^
Lift the handset.
j
Enter the access code (see access code table
page 121).
Z
Wait until you hear the confirmation tone.
j
Dial the phone number of the party you want to contact.
Caller ID transmission is reactivated after this call.
Temporarily deactivating anonymous calling
for the next call
If your administrator suppressed caller ID transmission
for your phone, you can enable this setting for the next
call as follows:
^
Lift the handset.
j
Enter the access code (see access code table
page 121).
Z
Wait until you hear the confirmation tone.
j
Dial the phone number of the party you want to contact.
When you end this call, caller ID transmission is sup-
pressed once again for the next call.