Table of Contents
Advertisement
Command
Type
Purpose
The INSTALL command loads terminate-and-stay-resident (TSR) programs
during CONFIG.SYS processing.
Syntax
INSTALL = [ d :\][ path ] TSR_Program TSR_Arguments
Remarks
The TSR program is loaded much the same as if loaded from AUTOEXEC.BAT,
except that an environment is not created. The lack of an environment may cause
some programs to execute incorrectly. These programs must be loaded from the
AUTOEXEC.BAT Þle.
Examples
INSTALL = C:\BIN\FLASHDSK.EXE H:
This example causes the Datalight FLASH Disk File Manager to be loaded from
CONFIG.SYS using INSTALL. The program is speciÞed with a full drive and path
description, and also has an argument of ÒH:Ó.
INSTALL
CONFIG.SYS
Chapter 5: ROM DOS Commands
5-61
Advertisement
Table of Contents
