Table of Contents
Advertisement
PDT 3200 Technical Reference Guide
Command
Type
Purpose
The semicolon (;) command has two purposes: to allow comments in a batch or
CONFIG.SYS Þle, and to temporarily disable a command without physically
deleting the command from the Þle. See also the REM command.
Syntax
; any text here
Remarks
The ; command is used to functionally remove a command from the CONFIG.SYS
Þle without actually deleting it from the CONFIG.SYS Þle.
Examples
;C:\BIN\VDISK.SYS 64 /E
The above example causes the VDISK command to not be executed until the ;
command is removed.
5-14
;
Internal
Advertisement
Table of Contents
