Getting Started with the PDT 3400
Before You Use the PDT 3400
Charge and Install the Battery
Prior to using the PDT 3400 for the first time, install and, if necessary, charge the NiMH
battery. The battery can be charged externally before installation or after installation in the
PDT 3400.
Refer to Chapter 10, Maintenance, for instructions on charging and installing the battery.
Configure the PDT 3400
Configuration consists of loading the software and applications in the PDT 3400's flash,
creating and loading a RAM disk, and setting the PDT 3400's operating parameters. For a
discussion of configuration issues/considerations and an overview of the process, refer to
Chapter 4, Terminal Configuration Issues. For instructions on how to edit the configuration
files, load software, create a RAM disk, and set parameters, refer to Chapters 5-8.
1-5