Table of Contents
Advertisement
PDT 3200 Technical Reference Guide
Command
Type
Purpose
Set the maximum number of drives.
Syntax
LASTDRIVE = letter
Remarks
Letter may be any character between A and Z. It stands for the last drive letter that
ROM-DOS will be able to access. The default value is E.
The minimum number LASTDRIVE may be is the number of drives in your
computer. If letter is less than the number of drives in your computer, then the
LASTDRIVE command is ignored.
LASTDRIVE is often used to cause ROM-DOS to make more space for non-
standard drives that are not in your system. These drives may be CD-ROM drives,
FLASH Disk drives, or network drives.
Example
LASTDRIVE = H
The above will cause ROM-DOS to allocate for eight drives. If your computer has
Þve installed then there is room for three additional non-standard drives.
5-62
LASTDRIVE
CONFIG.SYS
Advertisement
Table of Contents
