Table of Contents
Advertisement
Command
Type
Purpose
The NUMLOCK command is used to set the Num Lock key on the keyboard to on
or off when your computer starts.
Syntax
NUMLOCK=[on|off]
Remarks
Selecting ON designates that the Num Lock key is set to on when DOS boots.
Selecting OFF designates that the Num Lock will be off when DOS boots. In either
case, you will still have the ability to manually turn the Num Lock key on and off
after boot up with the NUMLOCK command.
Examples
NUMLOCK=on
The Num Lock key will be set to on when the system boots.
NUMLOCK
CONFIG.SYS
Chapter 5: ROM DOS Commands
5-71
Advertisement
Table of Contents
