Table of Contents
Advertisement
Command
Type
Purpose
A device driver may be installed into ROM-DOS via the DEVICE command.
Syntax
DEVICE = device_driver arguments
Remarks
A device driver is used to allow ROM-DOS to access hardware that is not common
in all PCs.
The full drive path and Þle name of the device must be speciÞed. The arguments
are different depending on the device driver.
Examples
DEVICE=C\BIN\VDISK.SYS 120 /e
This example installs the ROM-DOS RAM disk driver, VDISK.SYS, via the
DEVICE command. There will be 120K bytes of extended memory dedicated to the
RAM disk in this example.
DEVICE
CONFIG.SYS
Chapter 5: ROM DOS Commands
5-39
Advertisement
Table of Contents
