Table of Contents
Advertisement
Chapter 2: System Utilities
/p
Uses Symbol ACK/NAK protocol for the transfer.
/q
Runs the transfer Òquietly.Ó If you use this option, only the Þlename and a ÒTransmit-
ting...Ó or ÒReceiving...Ó message is displayed. If you do not use this option, additional in-
formation will be displayed.
/r
Receives the speciÞed Þle.
/s
Performs an ASCII dump. This can be speciÞed in transmit mode (/t) only.
/t
Transmit the speciÞed Þle. This is the default and does not need to be speciÞed.
/x
Uses Xmodem protocol for the transfer.
2-13
Advertisement
Table of Contents
