Table of Contents
Advertisement
PDT 3200 Technical Reference Guide
Command
Type
Purpose
The FCBS command allows you to specify the number of Þle control blocks (FCBs)
open at one time.
Syntax
FCBS = number [, minimum number ]
Remarks
Number speciÞes the maximum number of FCBs open at any given time. The
default for this value is 4. The value for number must be in the range from 1 to 255.
The minimum number speciÞes the minimum number of FCBs to be open at all
times. The minimum number argument has the same default and range value as the
number argument.
Example
Set the maximum number of FCBs to 8 and leave at least 4 open at all times.
FCBS = 8,4
5-50
FCBS
CONFIG.SYS
Advertisement
Table of Contents
