Introduction; Before You Install The Sdk; Symbol Windows Ce Sdk - Symbol PDT 8100 Series Product Reference Manual

Introduction

To develop applications to run on the PDT 8100 with Intel XScale Technology, the PDT
8100 with Intel XScale Technology Windows CE Software Developer's Kit (SDK) is
available. This SDK contains terminal specific software not available in the standard
Microsoft Windows CE Platform SDK.
The minimum system configuration required to install the SDK is:
• IBM-compatible PC with Pentium 150 MHz processor or higher
• Windows
®
Service Pack 6 or later, or Microsoft Windows
Windows
®
• 24MB RAM for Windows 98, 32 MB RAM for Windows NT
• 100MB available hard disk space
• CD-ROM drive
• One available serial port
• Mouse.
Also, ensure the drive you are installing to accepts long filenames (larger than the 8.3
filename convention).

Before You Install the SDK

Before you install the Symbol Windows CE SDK for the PDT 8100 with Intel XScale
Technology, install the following tools:
• Microsoft eMbedded Visual Tools 3.0
• Windows CE Platform SDK for Pocket PC (not Pocket PC 2002)
• Microsoft ActiveSync version 3.5.

Symbol Windows CE SDK

The SDK installation program loads the required Windows CE components on the
development PC used to create the image files (via Terminal Configuration Manager) for
download to the terminal.
The Symbol SDK includes:
• Symbol-provided files
98 second edition, or Windows
XP operating system
Software Installation on Development PC
NT operating system version 4.0 with
®
2000 operating system, or
®
10-3