Table of Contents
Advertisement
Command
Type
Purpose
The INCLUDE command can be used to include the contents of one conÞguration
block into another. The instructions from the originating instruction block, as well
as the included block, will be carried out. This command can only be used within
a CONFIG.SYS conÞguration block.
Syntax
INCLUDE = blockname
Remarks
This command is useful for sets of instructions common to several system
conÞgurations. The commands can be deÞned once in a single conÞguration block
and then inserted into other conÞguration blocks via the INSERT command. Please
refer to the section on Using Multiple ConÞgurations for more details.
Examples
:
:
[MISC]
device=mouse.sys
device=c:\netword\loadnet.sys
[WORDPROC]
files=20
buffers=10
set path=c:\bin;c:\wp;c:\dict
INCLUDE
CONFIG.SYS
Chapter 5: ROM DOS Commands
5-59
Advertisement
Table of Contents
