Table of Contents
Advertisement
Command
Type
Purpose
Display or modify the verify state.
Syntax
VERIFY [ON ≠ OFF]
Remarks
The VERIFY command will set the state to on or off. When VERIFY is on then each
following disk write operation will be veriÞed. This is usually used when critical
data is being written to disks.
If VERIFY is on, then each disk write operation will take longer. Due to this extra
time for disk operations, most users leave VERIFY off during normal operations.
Examples
VERIFY
The above example will display the verify state.
VERIFY ON
This example will set the verify state to on, causing ROM-DOS to verify each
following write to a disk.
VERIFY
Internal
Chapter 5: ROM DOS Commands
5-95
Advertisement
Table of Contents
