Overview - PSC Falcon PT40 Product Reference Manual

PT40 Dock, Serial Cable,

Overview

The PSC PT40 Dock and Serial cable are specially designed for use with the
PT40. Use the Dock or Serial cable for transferring data and files between the
PT40 and a PC, and for recharging the PT40's batteries.
To transmit data to or from the PT40, place the unit in the dock or connect the
serial cable. To use the PT40 for data collection, you must disconnect it from
the dock or serial cable. You can also use the PT40 Dock to recharge the PT40's
rechargeable main battery and backup battery. For more information on batter-
ies, refer to
PT40 Dock
Set up the PT40 Dock as described in
Figure B-1. Falcon PT40 Dock
Docking Port
Product Reference Guide
and Power Adaptor
Falcon PT40 Batteries on page A-1
Spare Battery Charging Slot
Appendix B
.
Attaching the PT40 to a PC page B-3
Power Adaptor
Connector Jack
.
Serial Cable
9-Pin Serial
Connector
B-1