Switching Applications; Terminating The Application <F1; Uploading Files <F2 - PSC Falcon PT40 Product Reference Manual

Data Collection with PT40 Software Applications

Switching Applications

The PT40 can have as many as 4 different applications in memory, any one of
which can be selected and run. To move to a different application from the
application currently running, you must initiate a special key-sequence on the
keypad. Simultaneously press the
rently running application on hold. A special dialog display opens
Terminating the Application <F1>
1. Press the
If you select terminate the application at this screen, you will permanently destroy
any data you collected while the application was running.
CAUTION
2. Press any key to enter the
Uploading Files <F2>
1. Press the
2. A new display appears, with instructions for uploading the data from the
3. Press any key to initate the data upload. (This is similar to transferring
2-4
You selected the
the application!
F1= Terminate
F2= Upload files
F4= Continue app
key to terminate execution of the current application.
<F1>
The PT40 returns to the opening sign-on screen.
another application to run.
key to upload any data that has been collected while run-
<F2>
ning the application.
application.
Prepare host to
rcv files, and
connect I/O to
host I/O port.
To save the data
press any key
data files using
XFER32
<SH>+<CLR>+<ENT>
termination of
APPLICATION/TEST
; refer to
Using XFER32 starting on page 3-2
keys to put the cur-
menu and can then select
.)
®
Falcon PT40