Transfer Tab - PSC Falcon PT40 Product Reference Manual

Crash Recovery NOTE:

Transfer Tab

Select the
Figure 3-3. Transfer Tab of the File Transfer Utility
Sender Timeout
(Seconds)
Receiver Timeout
Path/Filename
Transmission
Overwrite
Product Reference Guide
ZModem
This feature is only available with
tab to establish file transfer settings.
Transfer
Enter the maximum number of seconds to wait for a connec-
tion when sending files. A value of
Enter the maximum number of seconds to wait for a connec-
tion when receiving files. A value of
NOTE:
PT40. This feature is only available with
Select to determine the action the receiver takes when a
received file already exists.
Source Longer or Overwrites the existing file if the received file is longer or
Newer newer.
CRCs Don't Overwrites the existing file if the CRCs of both files don't
Match match.
Append Appends the received file to the existing one.
Always Overwrites the existing file with the one received.
Source Newer Overwrites the existing file if the received file is newer.
Date/Length Overwrites the existing file if the dates or lengths of both
Don't Match files don't match.
Never Skips the transfer if the received file already exists.
Protocol is NOT supported by the Falcon PT40.
ZModem
ZModem
Protocol is NOT supported by the Falcon
Using XFER32
protocol.
0
waits indefinitely.
0
waits indefinitely.
ZModem
protocol.
3-5