Resetting the PT40
Sometimes you will need to reset the PT40. Both Soft Reset and Hard Reset
return the PT40 to the opening display screen (refer to
and return a unique series of beeps and tones to verify the reset.
Resetting the PT40 is similar to pressing
stored in the portable's memory is cleared.
CAUTION
Soft Reset:
Scan the following reset bar code:
Hard Reset:
1. Remove the main battery or external power supply.
2. Press and hold the
The Keypad
The keypad on the PT40 has three types of keys: action keys, function keys,
and data keys. Each key produces a beep when pressed.
•
•
•
Product Reference Guide
Use a soft reset to reboot a PT40 when there is power available.
Reset
Use a hard reset to reboot a PT40 without power.
<CLR>
battery or reconnecting the power supply.
Refer to
Figure 1-2 on page 1-4
Refer to
Table 1-1 on page 1-5
Refer to
Table 1-2 on page 1-5
<Ctrl>+<Alt>+<Delete>
* +
.
*
and
keys while reinserting the main
<ENT>
for an illustration of the Falcon PT40.
for a list of data keys and cycles.
for a list of action keys and functions.
The Keypad
)
Figure 1-1 on page 1-2
on a PC. All data
1-3