Continuing The Application <F4; Setting The Time And Date - PSC Falcon PT40 Product Reference Manual

Continuing the Application <F4>
Press the
data with the application.

Setting the Time and Date

In the representations of the display of the Falcon PT40 that follow, the
indicates the blinking cursor.
You can access the date and time prompts from other display screens and menus
(such as the password prompt in
Figure 2-2. The Time and Date Display
When starting the application for the first time, the display screen shows the
date currently loaded in memory. If the displayed date is correct, press the
<ENT>
the month, day, and year (e.g., 092302 for
accept the entry.
Figure 2-3. The Current Time Display
The next display screen shows the time currently loaded in the PT40's mem-
ory. If the displayed time is correct, press the
enter the correct time in 24-hour format. Use two digits each for the hour,
minute, and seconds (e.g., 211732 for
Product Reference Guide
key to return to the current application and continue collecting
<F4>
Current Date:
09/23/02
Enter New Date:
¤
key. If the date is wrong, enter the correct date. Use two digits each for
Current Time:
21:17:32
Enter New Time:
¤
).).
Figure 2-4 on page 2-6
Figure 2-2
<ENT>
, above).
Figure 2-3
Setting Up the PT40
¤
symbol
, above). Press
<ENT>
key. If the time is wrong,
2-5
to