Table of Contents
Advertisement
Refer to
The PT40 stores the collected data in a single ASCII text file. When uploading
the file to the PC, the data appears as a list. Each line in the list contains two
fields separated by a comma. The first field is the location, and the second field
is the item's identification number. The example in
file uploaded from a PT40 that used
Figure 2-7. ASSETPRO Collected Data in ASCII text file
Product Reference Guide
4. The location ID and item ID appear together on the third line of the
screen, separated by a comma, and the second prompt remains on the
screen.
• The PT40 is ready to accept another ID for an asset at the current
location.
5. When finished collecting asset IDs for the location, press the
to return to the first prompt.
6. Repeat steps 2 through 5, above, until IDs for each asset at every loca-
tion is collected.
7. Press the
key to return to the first prompt.
<F4>
8. Press the
key again to return to the application menu.
<F4>
Uploading Data to the Host PC starting on page 3-2
ITEM ID
¤
WH3E, 004322
F3=REV F4=EXIT
ASSETPRO
BLDG1,000295
BLDG1,001862
BLDG1,000945
BLDG1,001008
BLDG1,000036
BLDG1,000490
BLDG2,000288
BLDG2,002596
Using PALPRO40 to Collect Data
<F4>
to upload your data.
is part of a data
Figure 2-7
to collect data.
key
2-11
Advertisement
Table of Contents
