Logging Tab; Sending And Receiving Data With Xfer - PSC Falcon PT40 Product Reference Manual

Transferring Files and Data
File Transfer Default

Logging Tab

Select the
communications log can be helpful as a trouble-shooting aid.
Figure 3-4. Logging Tab of the File Transfer Utility
Log To File
Log To Screen
Append to Log
Log Path/
Filename
Browse

Sending and Receiving Data with XFER32

Verify that the PT40 is properly attached to the host PC. If you have a PT40
dock for your PT40, make sure that the dock is properly attached to the PC.
Refer to
Files on page 3-7
3-6
Enter the
File Transfer Default
files. Use the
tab to establish settings for the communications log. The
Logging
Specifies that the log is to be written to a text file.
Specifies that the log is displayed on screen.
This option becomes available when you select
When enabled,
the log file. If not enabled, new log information replaces the previ-
ous log file.
Specify the location for storing the communications log. If a path
is not given, the file is stored in the
Use the
Browse
, below for specifics on sending files. Refer to
Transmit Files
for specifics on receiving files
folder for storing received
button to locate a new location.
Browse
adds log information to the end of
Append to Log
Default File Transfer
button to locate a new log file.
.
Log to File
folder.
Receive
®
Falcon PT40