PSC Falcon PT40 Product Reference Manual page 100

Programming Parameters
Commands cannot be split between two or more bar codes. It is not possible
to have a parameter ID number at the end of one bar code and its setting or
string at the beginning of the next.
Programming Parameters
For a description of serial parameters, refer to
complete list of parameters and defaults, refer to
page E-1
Setting the Hour Format, Time, and Date
Use the PT40's keyboard to enter the time and date in the current format.
Time
Turn on parameter ID value D8 to set the PT40's real-time clock display to
24-hour (military-style) format. When this parameter is set to
displayed in 12-hour format. The default time display is 24-hour format. Use
the 12- and 24-hour bar codes to change the format. To set the time on the
PT40's clock, scan the
Date
Turn on parameter ID value D9 to set the PT40's date display to international
format (day/month/year) or off to set it to U.S. format (month/day/year). The
default format is U.S. Format. To set the date in the PT40, scan the
code. Use the
Clock and Calendar on page D-12
When finished setting the date and time formats, press any function key to return
to the program.
E-6
.
bar code.
Time
Time
Format bar codes to change the format.Refer to
International
Date
Table E-8 on page E-12
Programming Parameters on
*%-*
for these bar codes.
*%.*
. For a
, the time is
Off
bar
Date
®
Falcon PT40