Table of Contents
Advertisement
Falcon PT40 Batteries
CAUTION
Use only a power adaptor and main battery supplied by a PSC dealer. The user of
another adaptor or battery can damage the PT40 and void your warranty. For the
correct power adaptor and main battery for the Falcon PT40, please refer to the PSC
Price Book on
Lithium-ion batteries benefit from an initial 'conditioning'. For the first 3 charge
cycles, fully charge the main battery for at least 12 to 24 hours. Then allow it to fully
discharge before recharging it again.
After a prolonged storage period the main battery may again require three to four
charge/discharge cycles to achieve maximum capacity.
Power is not required to transfer data to the Host PC using the serial cable, but is
required when using the dock. Use the Power Adaptor if the battery is discharged.
While the PT40 is recharging, the LED on the front of the PDT is red. When the battery
is fully charged, the LED changes from red to green.
Figure A-1. The PT40 and Main Battery
Laser
A-2
Recycle Lithium-Ion Batteries.
Do not throw Lithium-Ion Batteries in the trash.
www.pscnet.com
Belt Clip Knob
Upper Recess
Main Battery
Lower Recess
®
Falcon
PT40
Advertisement
Table of Contents
