Table of Contents
Advertisement
If the application is set up to add a date/time stamp, the date and time that the item
was checked out will follow the item ID on the third line. (You must scroll the
display to see the entire line.)
Refer to
The PT40 stores check-in data in one ASCII text file and check-out data in
another file. When uploading one of the files to the PC, the data appears as a
list. Each line in the list contains two fields separated by a comma. The first
field is the LOCATION ID, and the second field is the ITEM ID.
When using the date/time stamp, each line also includes the check-in or
check-out date and time. The list shown in
file uploaded from a PT40 that used
Figure 2-10. TRACKPRO Collected Data in ASCII text file
Product Reference Guide
screen, and the PT40 is ready to accept another ID for an item at the
current location.
9. When finished collecting ITEM IDs for the location, press the
to return to the prompt for the LOCATION ID.
10. Repeat steps 5 through 10 until all the IDs for the ITEMs at every loca-
tion are collected.
11. Press the
key again to return to the menu shown at step 4.
<F4>
12. To change from check-in to check-out (or vice versa), repeat step 4.
• Otherwise, press the
Uploading Data to the Host PC starting on page 3-2
MAIN,R44-2173,10/16/02,10:27:18
MAIN,R44-2260,10/16/02,10:27:45
MAIN,R44-2278,10/16/028,11:04:51
MAIN,R44-2283,10/16/028,11:22:02
WHS,R44-2285,10/16/028,11:40:53
WHS,R44-2287,10/16/028,11:40:57
WHS,R44-2289,10/16/028,11:41:11
WHS,R44-2314,10/16/02,11:41:15
ITEM ID
¤
IN :MAIN,P203
F3=REV F4=EXIT
key to return to the application menu.
<F4>
Figure 2-10
TRACKPRO
Using PALPRO40 to Collect Data
<F4>
to upload your data.
is part of a check-out
with the date/time stamp.
key
2-17
Advertisement
Table of Contents
