Gateway 920 User Manual page 58

8
Place the edge of a small flat-head screwdriver under the battery and lift
the battery up until it comes out of the socket.
9
Make sure that the positive (+) side of the new battery is facing up, then
press the new battery into the socket until it snaps into place.
10
Follow the instructions in
11
Turn on the server.
12
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
13
Restore any BIOS settings that you wrote down in
14
Save all your settings and close the BIOS Setup utility.
"Closing the server case" on page
www.gateway.com
Replacing the CMOS battery
28.
Step 4.
53